Saltwater-rated. Corrosion-resistant. Code-compliant. Built for decades of waterfront performance.
Every system engineered for saltwater exposure, code compliance, and 20+ year service life — private docks to full marina infrastructure.
Lumitec, WAC, and Bluefin LED dock, step, piling, and underwater systems — saltwater-rated, fully automated with smart home control, voice activation, and scene scheduling.
Two systems available: Lumitec SeaBlaze II (24V RGBW LED, low voltage, full color control) and Deep Glow (120V metal halide, green/white/blue — brighter, no RGBW, outstanding fish attraction with no lens fouling).
30A, 50A, 100A, 125A, and 200A installations. Equipotential bonding, GFEP (Ground Fault Equipment Protection) and GFCI on every circuit, ELCI (Equipment Leakage Circuit Interrupter) at every service point. Can upgrade single-phase to 3-phase including FPL service planning.
Marine pedestals with aluminum enclosures and enamel powder coating, per-slip metering, GFCI on every outlet — complete electrical service from subpanel to slip. MarineSync monitoring supports up to 10 pedestals.
Marine-grade conduit, liquid-tight fittings, UV-resistant materials, and 316 stainless steel and/or brass machine screws throughout — engineered for decades of saltwater performance without degradation.
MarineSync GFEP, Bender MarinaGuard, and ELCI (Equipment Leakage Circuit Interrupter — trips on even small current leaks to water before shock hazard) at every service point — life-safety graded, NFPA 303 compliant, load-tested before sign-off.
Lumitec · WAC · Bluefin — Authorized Installer
Lumitec, WAC, and Bluefin LED systems — RGBW color, permanent underwater, recessed step lighting, and full smart home automation with voice control and scene scheduling. Built for Florida's saltwater climate.
Millions of scenes, app-controlled
NEMA 4X — saltwater-rated
Up to 80% less vs. traditional
RGBW Color Systems
Programmable to millions of scenes — every photo is an actual PSEC waterfront installation in South Florida.
Shore Power Systems
Marine-grade shore power — 30A through 200A pedestals with powder-coated aluminum enclosures, GFEP and GFCI on every circuit, equipotential bonding verified, and full permits on every install. 3-phase available including FPL service coordination.
30A, 50A, and 100A — right-sized for any slip or vessel class
Aluminum w/ enamel coating — sealed against saltwater, UV, corrosion, and coastal weather
100A Pedestal & Kraken Controller
100A Pedestal — Marina Shore Power
Hoist & Pedestal Combo
Robalo on Lift — 50A Pedestal
Finished Pedestal — Boat on Hoist
Shore Power Complete — Open Water Dock
Completed Install — Triple-Engine Hoist
Dock Pedestal & Shore Power
120V Pedestal & Hose Holder
30 Amp Pedestal
Site Preparation
Form & Pour
Conduit Runs
Wire Pull
Pedestal Installed
Shore Power Live
Finished — Live!Waterfront Enhancement
Saltwater-rated LED seawall systems — permanent uplighting, color-changing RGBW, and submerged accents engineered for Florida's coastal waterfront.
Saltwater-rated, zero corrosion
Max output, minimal power draw
Site-specific lighting plan included
Daytime View
Nighttime View
Fixtures — Pre-Installation
Seawall ConstructionLift & Hoist Electrical
Motor, control, and hydraulic pump electrical for every marine hoist type — NFPA 303-compliant wiring, dedicated circuits, and weatherproof conduit from single cradle lifts to multi-slip hydraulic systems.
All marine hoist electrical must meet NFPA 303. Every PSEC system is load-tested, inspected, and signed off — engineered for permanent waterfront operation.
Life Safety — Critical Hazard
Electric Shock Drowning is invisible, silent, and fatal. PSEC installs the advanced ground-fault protection systems most electricians won't — and posts bilingual ESD warning signs at every dock we work on.
Faulty dock wiring, corroded shore power cords, and unprotected boat electrical cause lethal current leakage into the water — with no visible warning.
Florida's extensive marina network makes it a high-risk state for ESD. Incidents occur near shore power pedestals, hoists, and dock wiring — in fresh and salt water.
Swimmers, dock workers, boaters, and children — anyone in or near the water is at risk from current they cannot see, feel, or anticipate.
MarineSync GFEP and Bender MarinaGuard systems are rarely installed — because most electricians don't know how. PSEC installs, wires, and tests these advanced protection systems on every waterfront project. We also fabricate bilingual ESD warning signs in English and Spanish, posted at every dock, slip, and waterfront access point we work on.
Nobody should lose their life to a hazard they can't see. That's why every PSEC waterfront install includes life-safety protection beyond minimum code requirements.
Power Saver Electric Corp performs complete marina electrical safety audits. FL Masters License EC13002571. Call us before anyone gets in the water.
MarinaGuard Ground Fault Monitor
MarinaGuard — Exterior Install
ESD Warning Signs — English & Spanish
Marina Sub-Panel — GFCI Breakers & Shunt Trip
Shunt Trip Breaker — 125A Panel
Pedestal GFCI Monitor — 100mA GFM
MarineSync RUM — Remote Utility Monitor & Control
MarineSync ELCI Sensor — ES3000.100
MarinaGuard — Live & Active
ESD Warning Signs — English & Spanish
GFCI breakers, ELCI devices, Bender MarinaGuard ground-fault monitors, and MarineSync smart controls at every outlet near water. Load-tested per NFPA 303 before sign-off. Bilingual ESD warning signs at every slip — standard on every PSEC waterfront install.
High-performance electrical solutions built for marine environments — saltwater-rated, corrosion-resistant, code-compliant, and fully permitted on every project.